Sunday, July 19, 2015

Featherweight Card Table - my newest acquisition!

Well there is very little left that I covet for my sewing room but this was something I was always on the lookout for.  I never actively searched for it, but I knew if I found one at the right price I'd get it.

In five years of keeping an eye out for a Featherweight card table this is only the second one I've ever seen.  I decided I might as well get it because it just doesn't seem like there are that many of them around.  Even on eBay, there may be one or two for sale at any given time and that is it.  My theory is that they were just absorbed into households as an every day table because unlike a regular sewing cabinet they were a useful piece of furniture with or without the machine.

The nice thing is that like all Singer products made before about 1965 or so, it is very high quality.  This thing weighs a ton!  It is solid wood, not cheap particle board. The hardware is high quality and heavy duty - nothing flimsy here.  This is a very nice table by any standard and it is the perfect complement to a lovely little Featherweight.

If I have to justify this further (I don't, do I?) I can tell myself that this is a great extra table for the kids for big family meals or even for a party.  It is pretty enough to use for any occasion.

Also, DH and I are looking to downsize sometime in the next couple of years and this will be a great all purpose table for when we need to save space.  We can do jigsaw puzzles on it or play cards on it in addition to using it for an extra dining table.

Score!  I love it!

Saturday, July 4, 2015

Accessories for my Apple Devices - a How-To

My very first "How-To"

I don't know how helpful this will be, and I'm not great at photos, but I wanted to demonstrate how I made a sleeve for my iPad Air.

And also show the sleeve I made for his big brother, the MacBook Pro

I started with an end-of-the-bolt yard of fabric I bought one day just because I liked it.  Then added in some remnants from my stash plus some trims and notions I had on hand.  I didn't buy anything specifically for this project.
Main fabric, contrasting fabric, rick-rack (or other trim), button

Fusible fleece, velcro, thin elastic cord

This is my "pattern".  For the iPad Air + the folio (Zagg keyboard), a piece of regular notebook paper is actually the perfect size.  For any other size device, wrap a tape measure around it in both directions (lengthwise and widthwise).  Divide each number in half then add one inch.

Example:  if the device measures 15" around the width and 24" around the length, then the pattern measurement would be 15/2 + 1 = 8.5" x  24/2 + 1 = 13"

The flap is cut 1/4" narrower on EACH side (see above) and then can be drawn using the lined notebook paper as a reference.

These are all the pieces needed for the project.  There is 1/2" seam allowance

1.  Two main pieces each from the main and contrasting (lining) fabric.  Mine is 8.5" x 11"

2.  One flap each from the main and contrasting fabric

3.  One pocket each from the main and contrasting fabric.  The width of the main piece plus a little more than half as long.  Mine is 8.5" x 7"

4. One piece of contrasting fabric the width of the main pattern piece x 4" for pocket band

5.  Fusible fleece: two main pieces + one flap piece.  Cut away seam allowances before fusing to avoid bulky seams.  Like this:

On pocket band, fold lengthwise edges into meet middle then fold again and press

Open up, and use glue stick to apply hook side of velcro to back of band, to hold it in place while you sew it on

Put pocket sections wrong side together, fold band over top, and stitch in place close to folded edge

Sew soft velcro strip to front

Pin rick-rack to front flap, 3/4" from edge and sew in place

Cut 4" piece of elastic cord, tie a loop with a large knot.  Position knot at seam line, baste into place.

Pin flap lining to flap, right sides together.  Mark knot with pin.  When sewing seam, be sure knot is INSIDE the seam allowance.

Turn flap right side out and press

Mark position for button on pocket and sew into place.  Baste pocket onto front.

With right sides together, sew one lining section to front along top seam, press open. (left)  

Position flap and back sections right sides together then put back lining section over these right side down.  Pin and stitch all three pieces together at top seam, then press open as shown. (right)

Pin these two sections right side together, and stitch all the way around beginning at corner shown on top right and ending at corner shown on top left. 

Leave a 3"-4" opening at bottom of lining as shown in order to turn work.

Turn right side out

and press

Press under seam allowance at open edge on bottom of lining

Sew this opening closed with an overedge stitch

Push lining to inside, insert device

Button it up and DONE!